These rockwall panels are small enough to ship via UPS or FexEx to save you time and make for an easy install! Lay them out edge to edge to create a large rockwall or get creative and stagger them! Use an allen key to adjust anything you'd like to attach the the wall including Rock Climbing Holds, Wall Traverse Bars, Cliffhangers, Traverse Ropes, and even TRX bands!
 
What's Included:
Four finished panels ready for install (4' x 8' total area)
4' X 2' easy-to-handle panel size (actual dimensions 48"x23.75")
Pre-installed t-nuts on an 8" grid pattern
 
What else you will need:
Furring Strips or 2x6 girts to create horizontal bracing and space for the rock hold bolts behind the panels. You may add these spacers to your cart as an option on this page!
Attachments. There are a variety of awesome elements to attach to the Rockwalls including:
Rock holds
Wall Traverse Bars
Wall Traverse Ropes
Wall Traverse Cliffhangers
Volumes (very large rockholds)
Associated hardware for the attachments
 
The DIY panels are designed and engineered to make building your climbing wall as easy and painless as possible. Just unbox and start installing onto your 16" or 24" on center studs. The panels are textured, drilled, and t-nutted saving you hours of work. Our goal is to provide a commercial gym caliber panel to the DIY market. This is why we use 13 ply baltic birch, our self-guided industrial t-nut, and our industrial long-lasting texture. Walls are designed for indoor use or covered outdoor structures. The 2'x4' size makes it easy to install with one person and weighs in at 21lbs. This size also makes it easier to add different wall angles and transitions.
 
The 8" square t-nut grid is designed never to hit studs (16" or 24" standard stud spacing) and to flow seamlessly from one panel to the next. With 18 t-nuts per panel, you will have plenty of modularity and options for route setting.
 
*a minimum order of 4 panels is required for free shipping in the USA. Contact us for international shipping quotes at info@worldninjasport.com
 
Orders larger than 16 panels and custom panel orders will have longer shipping times.
 
Installation
DIY panels should be installed directly to a stud frame that can support the load. Generally, new supports are framed out for the installation of the climbing panels, or the existing studs are exposed (like in a basement, garage, or attic) where you can install directly to the studs.
 
Installation over Drywall
Installing over drywall is very possible but involves a bit more care. You will need to locate the studs behind the drywall and ensure panels are installed into the studs. You must also ensure the structure behind the drywall can support the load. You do not want to install panels directly onto the drywall. We can provide 3/4" spacers that sandwich between the DIY panels and the existing wall if you choose the with spacers listing. This allows your panels and t-nuts some breathing room. This is important for installing the climbing holds as the bolts for installing the holds will extend behind the wall. Having this small gap allows room for the bolts to extend through the whole t-nut without damaging your drywall (keep in mind drywall is not structural and you will always need to find studs to secure the panel).
 
We can help you put together a quote for everything you need including installation! Feel free to call or email!
 
Our Climbing Wall Panels for Indoor home or gym use must be freight shipped - please call us for a quote before checking out.